Pair of Securit S4316 100mm Self-Colored Steel Butt Hinges

Description

How to Use SECURIT S4316 Steel Butt Hinges

Introduction

The SECURIT S4316 Steel Butt Hinges are designed for use in various door installations. This guide will help beginners install these hinges correctly.

Tools Required

• Screwdriver
• Drill
• Drill bits
• Pencil
• Measuring tape
• Chisel
• Hammer

Preparation

1. Ensure you have all the necessary tools and materials.
2. Decide the placement of the hinges on the door and frame.
3. Use the measuring tape to mark the position of the hinges.

Installation Steps

1. Mark the Position:
   • Use a pencil to mark the top and bottom of each hinge on the door edge.
   • Transfer these measurements to the door frame.
2. Cut the Mortise:
   • Use a chisel and hammer to cut a mortise for each hinge on the door and frame.
   • The mortise should match the thickness of the hinge leaf.
3. Attach Hinges to the Door:
   • Place the hinge in the mortise on the door.
   • Use a drill to create pilot holes for the screws.
   • Screw the hinge to the door securely.
4. Attach Hinges to the Frame:
   • Align the door with the frame, ensuring the hinges fit into the frame’s mortises.
   • Drill pilot holes in the frame.
   • Screw the hinge to the frame.
5. Check Alignment:
   • Open and close the door to ensure it moves smoothly.
   • Adjust the hinges if necessary.

Safety Tips

• Ensure the door is supported while installing the hinges.
• Wear safety goggles when using power tools.

Maintenance

• Regularly check the screws to ensure they remain tight.
• Apply lubricant to the hinges periodically to maintain smooth operation.

By following these steps, you can successfully install your SECURIT S4316 Steel Butt Hinges.