Pair of SECURIT S4308 Zinc-Plated Steel Butt Hinges, 75mm

How to Use SECURIT S4308 Steel Butt Hinges

Step 1: Gather Your Tools

• Screwdriver
• Drill (optional, for pilot holes)
• Screws (usually provided with the hinges)
• Measuring tape or ruler
• Pencil or marker for marking

Step 2: Plan the Installation

• Determine where you will install the hinges. Typically used for doors, cabinets, and gates.
• Measure the distance from the top and bottom of the door or cabinet where you want the hinges to be placed.
• Mark the spots with a pencil or marker.

Step 3: Prepare the Surface

• If necessary, chisel out a recess for the hinge leaf on the door and frame to ensure a flush fit.
• Ensure the surfaces are clean and free of debris.

Step 4: Attach the Hinges

• Align the hinge with the marked spots on the door.
• Hold the hinge in place and use a screwdriver or drill to insert the screws into the pre-drilled holes.
• Repeat the process for the frame or second surface.

Step 5: Test the Installation

• Gently open and close the door or cabinet to ensure smooth operation.
• If the movement is restricted, check for misalignment or obstructions and adjust as necessary.

Tips for Beginners

• Use a level to ensure proper alignment of the hinges.
• Consider drilling pilot holes to make screw installation easier and prevent wood splitting.
• Check that the door or panel is level and aligned before fully tightening the screws.