Paint Factory Clear Matte Varnish, 300ml

Description

How to Use PAINT FACTORY MATT VARNISH CLEAR PAINT 300ML

Preparation

• Ensure the surface you intend to varnish is clean, dry, and free from dust or grease.
• Shake the can well before use to ensure the varnish is properly mixed.
• Test spray on a small, inconspicuous area to ensure compatibility and finish.

Application

• Hold the can approximately 20-30 cm (8-12 inches) from the surface.
• Apply the varnish in a steady, sweeping motion to avoid drips and runs.
• For best results, apply multiple thin layers rather than one thick coat. Allow each layer to dry before applying the next.

Drying and Curing

• Allow the varnish to dry to the touch before handling the object.
• Refer to the product’s instructions for complete curing time, which may vary depending on environmental conditions.

Cleanup

• Clean the nozzle after use by turning the can upside down and spraying until only gas comes out.
• Store the can in a cool, dry place away from direct sunlight and heat sources.

Safety Precautions

• Use in a well-ventilated area to avoid inhaling fumes.
• Wear protective gear such as gloves and a mask if necessary.
• Keep out of reach of children and pets.