Pack of 5 Dekton Hook and Loop Detail Sanding Pads, 60 Grit, 100mm x 140mm

Description

How to Use DEKTON Hook and Loop Detail Sanding Pads

Introduction

The DEKTON Hook and Loop Detail Sanding Pads are designed for precision sanding tasks. These 60 grit pads measure 100mm x 140mm and are perfect for removing paint, smoothing surfaces, and preparing materials for finishing.

Materials Needed

• DEKTON Hook and Loop Detail Sanding Pads (60 Grit)
• Compatible detail sander
• Protective eyewear
• Dust mask

Preparation

1. Ensure your work area is clean and well-ventilated.
2. Wear protective eyewear and a dust mask to protect yourself from debris and dust.
3. Inspect your sander to ensure it is in good working condition.

Attaching the Sanding Pad

1. Turn off and unplug your detail sander.
2. Align the Hook and Loop Sanding Pad with the base of the sander.
3. Press firmly to attach the pad securely to the sander.

Sanding Process

1. Plug in and turn on your detail sander.
2. Start with a low speed setting if your sander has variable speed control.
3. Gently press the sander onto the surface you wish to sand.
4. Move the sander in a consistent motion to avoid over-sanding in one spot.
5. Periodically check your progress and adjust the speed or pressure as needed.

After Use

1. Turn off and unplug your sander.
2. Carefully remove the sanding pad by peeling it away from the sander.
3. Clean the sander and surrounding area to remove any dust and debris.
4. Store the remaining sanding pads in a dry, cool place for future use.

Safety Tips

• Always wear protective gear when sanding.
• Do not use the sander near flammable materials.
• Keep the sander out of reach of children.