Pack of 20 Thermal Rolls for Card/PDQ Machine – 57 x 40 mm

How to Use 20 Pack Card / PDQ Machine Thermal Roll 57 x 40 mm

Introduction

This guide provides instructions for beginners on how to use the 20 Pack Card / PDQ Machine Thermal Roll 57 x 40 mm.

What You Will Need

• Card / PDQ Machine
• 20 Pack Thermal Roll (57 x 40 mm)
• Scissors (optional)

Step-by-Step Instructions

1. Prepare the Machine

• Ensure the card or PDQ machine is turned off before beginning.
• Open the paper compartment on the machine.

2. Insert the Thermal Roll

• Take one roll from the 20 pack of thermal rolls.
• Place the roll into the compartment with the paper coming from the bottom of the roll.
• Ensure the paper feeds correctly through the designated slot.

3. Feed the Paper

• Pull a small amount of paper out to ensure it is properly aligned.
• Close the compartment cover securely.

4. Test the Roll

• Turn on the machine.
• Perform a test print to check the paper feeds and prints correctly.
• If the paper jams, turn off the machine and re-adjust the roll.

Troubleshooting

• If the print is faded, check the orientation of the paper. The thermal side should face the print head.
• If paper jams continue, ensure the roll is seated correctly and there are no obstructions.

Safety Tips

• Always turn off the machine before changing the paper roll to avoid electric shock.
• Keep the paper rolls in a dry place to prevent moisture damage.