Pack of 2 BZP M5 x 43mm Hollow Wall Anchors by STAR

Description

How to Use STAR PACK 2 Hollow Wall Anchor BZP M5 x 43mm

This guide will help beginners understand how to properly use the STAR PACK 2 Hollow Wall Anchor for secure mounting on hollow walls.

Materials Needed

• STAR PACK 2 Hollow Wall Anchors
• Drill with appropriate drill bit
• Screwdriver
• Pencil
• Measuring tape
• Protective eyewear

Step-by-Step Instructions

1. Prepare the Wall

• Identify the location where you want to install the anchor.
• Use a pencil and measuring tape to mark the exact spot on the wall.
• Ensure there are no electrical wires or plumbing behind the wall at the drilling location.

2. Drill the Hole

• Put on protective eyewear for safety.
• Select a drill bit that matches the size of the anchor.
• Drill a hole into the wall at the marked location. Ensure the hole is deep enough for the anchor to fit completely.

3. Insert the Hollow Wall Anchor

• Gently push the hollow wall anchor into the drilled hole.
• Ensure the anchor is flush with the wall surface.

4. Secure the Anchor

• Use a screwdriver to tighten the screw inside the anchor.
• The anchor will expand behind the wall, securing itself in place.
• Continue tightening until the anchor is firmly set.

5. Mount the Object

• Place the object you want to mount over the anchor.
• Insert the screws provided with the anchor through the object’s mounting holes into the anchor.
• Tighten the screws to secure the object firmly to the wall.

Tips

• Ensure the load does not exceed the anchor’s weight capacity.
• Double-check all markings and measurements before drilling.