ORACSTAR PRO095 Waste Reduction Connector 40mm x 32mm

Description

How to Use the ORACSTAR PRO095 Waste Reducing Connector 40mmx32mm

Introduction

The ORACSTAR PRO095 Waste Reducing Connector is designed to connect two pipes of different diameters efficiently, reducing waste and ensuring a secure fit. Follow these instructions to install and use the connector properly.

Materials Needed

• ORACSTAR PRO095 Waste Reducing Connector 40mmx32mm
• Two pipes (one 40mm and one 32mm in diameter)
• Pipe cutter or saw (if necessary)
• Cleaning cloth
• Pipe sealant or PTFE tape

Preparation

1. Ensure you have all necessary materials and tools ready.
2. Measure the pipes to confirm their diameters are 40mm and 32mm.
3. If necessary, cut the pipes to the desired length using a pipe cutter or saw.
4. Clean the ends of the pipes with a cloth to remove any debris or moisture.

Installation

1. Apply pipe sealant or wrap PTFE tape around the end of the 40mm pipe.
2. Insert the 40mm end of the connector onto the 40mm pipe. Ensure it fits snugly.
3. Apply pipe sealant or wrap PTFE tape around the end of the 32mm pipe.
4. Insert the 32mm end of the connector onto the 32mm pipe.
5. Ensure both connections are secure and tight to prevent leaks.

Final Check

• Inspect the connection for any visible gaps or looseness.
• Run water through the pipes to check for leaks.
• If leaks are detected, tighten the connections or reapply sealant as needed.

Safety Precautions

• Always wear protective gloves when handling pipes and connectors.
• Ensure the workspace is dry to prevent slips.

Conclusion

By following these steps, you can effectively use the ORACSTAR PRO095 Waste Reducing Connector to join pipes of varying sizes, minimizing waste and ensuring a secure connection.