ORACSTAR PPW11 1/2 INCH TAP WASHERS, PACK OF 4

Description

How to Use ORACSTAR PPW11 Tap Washer 1/2in 4/PK

Introduction

The ORACSTAR PPW11 Tap Washer is designed to help you repair leaking taps by replacing the worn-out washer. Follow the steps below to effectively use this product.

Tools Required

• Adjustable wrench or spanner
• Screwdriver
• Cloth or rag

Steps to Replace Tap Washer

1. Turn Off Water Supply

• Locate the water supply valve under the sink or near the main water line.
• Turn the valve clockwise to shut off the water supply.

2. Drain Excess Water

• Open the tap to drain any remaining water in the pipes.
• Use a cloth or rag to catch any dripping water.

3. Remove Tap Handle

• Use a screwdriver to remove the screw holding the tap handle in place.
• Pull the handle off to expose the valve stem.

4. Extract Old Washer

• Use an adjustable wrench to unscrew the valve stem.
• Locate the old washer at the bottom of the valve stem and remove it.
• Check the condition of the old washer and note its size for replacement.

5. Install New Washer

• Take a new washer from the ORACSTAR PPW11 package.
• Place the new washer onto the valve stem where the old one was located.

6. Reassemble the Tap

• Screw the valve stem back into position using the adjustable wrench.
• Attach the tap handle and secure it with the screw.

7. Turn On Water Supply

• Slowly turn the water supply valve counterclockwise to restore the water flow.
• Check for leaks by running the tap; ensure the tap is functioning properly.

Conclusion

Congratulations! You have successfully replaced the tap washer using the ORACSTAR PPW11 Tap Washer 1/2in 4/PK. If issues persist, consider consulting a professional plumber.