ORACSTAR PPS34 Bath Chain Eye

Description

How to Use the ORACSTAR PPS34 Chain Eye for Baths

Introduction

The ORACSTAR PPS34 Chain Eye is designed to be used with bath chains for securing the bath plug. Follow these instructions to ensure proper installation and use.

Installation Instructions

1. Gather Necessary Tools:
   • Screwdriver
   • Measuring tape
   • Drill (if necessary)
2. Locate the Installation Spot:
   • Identify the desired position for the chain eye on your bath edge.
   • Ensure the spot allows for easy access to the bath plug.
3. Mark and Prepare the Area:
   • Use a measuring tape to mark the exact spot for installation.
   • If necessary, drill a pilot hole where the chain eye will be secured.
4. Attach the Chain Eye:
   • Align the chain eye with the marked spot.
   • Secure it using the screws provided and tighten with a screwdriver.

Connecting the Bath Chain

1. Attach the Chain:
   • Connect one end of the bath chain to the chain eye.
   • Ensure it is securely fastened to prevent detachment.
2. Connect the Plug:
   • Attach the other end of the chain to the bath plug.
   • Make sure the chain length allows for easy removal and insertion of the plug.

Maintenance Tips

• Regularly check the tightness of the chain eye screws to prevent loosening.
• Inspect the chain for signs of rust or wear and replace if necessary.
• Clean the chain eye and chain periodically to maintain their appearance and functionality.

Safety Precautions

• Ensure the chain eye is securely attached to prevent accidents.
• Always verify the chain is properly connected to avoid losing the bath plug.