ORACSTAR PPC25 Hose Clamp 18-25mm, Pack of 2

Description

How to Use the ORACSTAR PPC25 Hose Clip 18-25mm 2/PK

Introduction

The ORACSTAR PPC25 Hose Clip is designed to secure hoses onto pipes and fittings. This guide will help beginners understand how to properly use this product.

Tools Required

• Screwdriver (flathead or Phillips, depending on the clip)
• Protective gloves (optional, for better grip and safety)

Steps to Use the Hose Clip

Step 1: Prepare the Hose and Fitting

1. Ensure the hose is clean and free from any debris or damage.
2. Align the hose with the pipe or fitting you intend to secure it to.

Step 2: Position the Hose Clip

1. Take one of the hose clips from the pack.
2. Open the clip by loosening the screw slightly, if necessary.
3. Slide the hose clip over the hose, positioning it near the end of the hose that will fit onto the pipe or fitting.

Step 3: Attach the Hose to the Fitting

1. Push the hose onto the pipe or fitting until it is securely in place.
2. Ensure the hose clip is positioned over the part of the hose that is covering the fitting.

Step 4: Secure the Hose Clip

1. Using the screwdriver, tighten the screw on the hose clip.
2. Ensure the clip is snug but not overly tight, to avoid damaging the hose.
3. Check that the hose is firmly secured and does not slip off the fitting.

Additional Tips

• Do not overtighten the hose clip, as this can damage the hose.
• Regularly check the hose clip to ensure it remains secure, especially in high-pressure applications.