ORACSTAR PF285 3/4IN COMPRESSION SEALING NUT

Description

How to Use the ORACSTAR PF285 Compression Blanking Nut 3/4IN

Introduction

The ORACSTAR PF285 Compression Blanking Nut is designed to seal off the end of a pipe or fitting. It is commonly used in plumbing applications to close off unused connections. Follow the instructions below to ensure proper use and installation.

Materials Needed

• ORACSTAR PF285 Compression Blanking Nut 3/4IN
• Adjustable wrench or spanner
• PTFE tape (optional)

Installation Steps

1. Preparation

• Ensure the pipe or fitting is clean and free of debris.
• If desired, wrap PTFE tape around the threads of the blanking nut for a better seal.

2. Attaching the Blanking Nut

• Place the blanking nut onto the end of the pipe or fitting.
• Hand-tighten the nut to ensure it is positioned correctly.

3. Securing the Nut

• Use an adjustable wrench or spanner to tighten the blanking nut securely.
• Ensure it is snug but do not overtighten, as this could damage the fitting or the threads.

Final Checks

• Inspect the connection for any leaks.
• If leaks are detected, tighten the nut slightly more until the leaking stops.
• If the leaking persists, remove the nut and check for damage or improperly applied PTFE tape.

By following these steps, you should be able to successfully install the ORACSTAR PF285 Compression Blanking Nut and ensure a secure and leak-free connection.