ORACSTAR PF284 1/2 INCH COMPRESSION SEALING NUT

Description

How to Use the ORACSTAR PF284 Compression Blanking Nut 1/2in

Step 1: Gather Your Tools and Materials

• ORACSTAR PF284 Compression Blanking Nut 1/2in
• Adjustable wrench or spanner
• PTFE tape (optional)

Step 2: Prepare the Pipe

• Ensure the pipe is clean and dry.
• Check that the pipe end is cut squarely and is free of burrs.

Step 3: Apply PTFE Tape (Optional)

• If desired, wrap PTFE tape around the threaded end of the pipe to ensure a watertight seal.
• Wrap the tape in the direction of the thread.

Step 4: Install the Blanking Nut

• Slide the compression blanking nut onto the pipe.
• Thread the nut onto the end of the pipe or fitting by hand.

Step 5: Tighten the Blanking Nut

• Use an adjustable wrench or spanner to tighten the blanking nut securely.
• Be careful not to overtighten, as this could damage the fitting.

Step 6: Check for Leaks

• Turn on the water supply and check for any leaks around the blanking nut.
• If a leak is detected, tighten the nut slightly more or apply additional PTFE tape and reassemble.

Safety Precautions

• Ensure you are working in a safe environment.
• Wear appropriate safety gear if necessary.

Additional Tips

• Consult the manufacturer’s instructions for specific guidance.
• If unsure, seek professional assistance for installation.