ORACSTAR 1/2″ Hose Union Washer Pack of 5

Description

How to Use ORACSTAR Hose Union Washer 1/2″ 5/PK

Introduction

This guide will help you understand how to use the ORACSTAR Hose Union Washer effectively. These washers are designed to provide a watertight seal for hose connections.

Materials Needed

• ORACSTAR Hose Union Washer 1/2″ 5/PK
• Garden hose or tap with a compatible connector

Installation Instructions

Step 1: Locate the Connection Point

Identify the point where the hose connects to the tap or another hose.

Step 2: Remove the Old Washer

• Turn off the water supply to prevent leaks.
• Unscrew the hose or fitting to expose the existing washer.
• Carefully remove the old washer using your fingers or a small tool if necessary.

Step 3: Insert the New Washer

• Take one ORACSTAR hose union washer from the package.
• Place the new washer into the groove where the old washer was located.
• Ensure the washer sits flat and even to create a proper seal.

Step 4: Reattach the Hose

• Carefully screw the hose or fitting back onto the tap or connector.
• Tighten it by hand to ensure a secure fit.

Step 5: Test the Connection

• Turn the water supply back on.
• Check for any leaks around the connection point.
• If there are leaks, tighten the connection further or ensure the washer is properly seated.

Maintenance Tips

• Periodically check the washer for wear and replace if necessary.
• Store extra washers in a dry place to prevent deterioration.

Troubleshooting

• If leaks persist, ensure the washer is the correct size and properly aligned.
• Consider replacing the hose fitting if the washer is not resolving the issue.