NATIONAL ABRASIVES FLEXIBLE RED ANTI-OXIDE EXTRA COARSE ROLL, 1M X 115MM

How to Use National Abrasives Flexi Backed Red Anti-Oxide Extra Coarse Roll

Introduction

This guide will help beginners understand how to effectively use the National Abrasives Flexi Backed Red Anti-Oxide Extra Coarse Roll for their projects. Follow these steps for optimal results.

Materials Needed

• National Abrasives Flexi Backed Red Anti-Oxide Extra Coarse Roll
• Sanding block or holder (optional)
• Protective gloves
• Safety goggles
• Dust mask

Preparation

1. Ensure the work area is well-ventilated.
2. Wear protective gloves, goggles, and a dust mask to ensure safety.
3. Inspect the surface you intend to sand and clean it of any debris or loose particles.

Cutting the Abrasive Roll

1. Determine the size of abrasive roll needed for your project.
2. Using scissors or a utility knife, cut the roll to the desired length.

Using the Abrasive Roll

1. If using a sanding block or holder, attach the cut piece of the abrasive roll to it securely.
2. Begin sanding the surface by applying even pressure and moving in a back-and-forth motion.
3. Regularly check the progress to ensure even sanding across the entire surface.

Post-Sanding

1. Wipe down the sanded area with a clean cloth to remove any dust or debris.
2. Inspect the surface for any areas that may require additional sanding.

Cleaning and Maintenance

• Clean the abrasive roll by gently tapping it to remove excess dust.
• Store the roll in a dry, clean place to prolong its usability.

Safety Tips

• Always wear protective gear when sanding.
• Ensure the work area is free from flammable materials.
• Keep the abrasive roll away from children and pets.