**Material**: Zinc-plated steel, offering corrosion resistance and durability, suitable for outdoor use

Description

How to Use Roofing Bolts & Nuts Zinc M6 x 25

Materials Needed

• Roofing bolts & nuts (Zinc M6 x 25)
• Drill with appropriate drill bit
• Wrench or spanner
• Measuring tape
• Marker or pencil
• Safety goggles
• Gloves

Preparation

1. Put on your safety goggles and gloves to protect yourself during the installation process.
2. Use the measuring tape to determine where the bolts need to be placed on the roofing materials.
3. Mark the spots using a marker or pencil for easy identification.

Drilling the Holes

1. Select a drill bit that matches the size of the M6 bolts.
2. Drill holes into the marked spots on the roofing material.
3. Ensure that the holes are straight and deep enough to accommodate the bolts.

Inserting the Bolts

1. Insert the M6 bolts through the drilled holes.
2. Ensure that the bolt heads are flush with the surface of the roofing material.

Securing with Nuts

1. Place the nuts onto the protruding ends of the bolts on the opposite side of the roofing material.
2. Hand-tighten the nuts to hold them in place.
3. Use a wrench or spanner to fully tighten the nuts, ensuring they are secure but not over-tightened.

Final Checks

• Inspect each bolt and nut to ensure they are properly aligned and tight.
• Check the stability of the roofing components to confirm a secure installation.

Safety Tips

• Always wear safety goggles and gloves when handling tools and hardware.
• Be cautious when working at heights, and use appropriate safety equipment.
• Do not over-tighten the nuts, as this may damage the roofing material or the bolts.

Maintenance

• Regularly check the condition of the bolts and nuts for any signs of corrosion or loosening.
• Tighten any loose nuts as necessary to maintain a secure fastening.