Large Wall Hanger Holder Stand with Wire Spring Plate, Size No. 3 (9.5 – 14 inches) – 1 Piece

Description

How to Use the Wire Spring Plate Wall Hanger Holders Stand Large No. 3

Introduction

This guide will walk you through the steps of using the Wire Spring Plate Wall Hanger Holders Stand Large No. 3. This product is designed to securely hang and display your plates on the wall.

Materials Needed

• Wire Spring Plate Wall Hanger Holders Stand Large No. 3
• A plate measuring between 9.5 to 14 inches in diameter
• A wall hook or nail suitable for hanging
• Screwdriver or hammer (if necessary)

Installation Instructions

Step 1: Prepare Your Plate

• Ensure your plate is clean and dry.
• Inspect the plate for any cracks or damage before proceeding.

Step 2: Attach the Hanger to the Plate

• Extend the wire spring holder by gently pulling apart the arms.
• Position the bottom hooks of the spring holder on the lower edge of the plate.
• Gently stretch the top hooks over the top edge of the plate, ensuring a snug fit.
• Double-check that the hooks are securely gripping the edges of the plate.

Step 3: Mount the Plate on the Wall

• Select the desired location on the wall for display.
• Install a wall hook or nail at the appropriate height.
• Hang the plate using the hanger loop at the back of the holder.
• Ensure the hanger is securely placed on the hook or nail.
• Adjust the plate to ensure it hangs straight and level.

Safety Tips

• Ensure the wall hook or nail can support the weight of the plate.
• Do not hang the plate in an area where it might be easily bumped or knocked down.

Conclusion

By following these instructions, you can safely and effectively use your Wire Spring Plate Wall Hanger Holders Stand to display your plates with confidence.