KORBOND Sewing Machine Bobbins – Set of 6

Description

How to Use Korbond 6 Piece Sewing Machine Bobbins

Introduction

The Korbond 6 Piece Sewing Machine Bobbins are essential for any sewing project. This guide will help beginners understand how to use these bobbins in their sewing machines.

Materials Needed

• Korbond 6 Piece Sewing Machine Bobbins
• Sewing machine
• Thread
• Scissors

Step-by-Step Instructions

Step 1: Prepare Your Sewing Machine

1. Ensure your sewing machine is turned off and unplugged for safety.
2. Open the bobbin compartment, usually located beneath the needle area.

Step 2: Winding the Bobbin

1. Place your thread spool on the spool pin.
2. Pull the thread through the thread guide and wind it around the bobbin winder tension disc.
3. Insert the empty bobbin onto the bobbin winder spindle.
4. Push the bobbin winder to the right until it clicks into place.
5. Hold the thread end and start the machine to begin winding the bobbin.
6. Once the bobbin is full, cut the thread and remove the bobbin from the spindle.

Step 3: Inserting the Bobbin

1. Place the wound bobbin into the bobbin case, ensuring the thread runs in the correct direction.
2. Pull the thread through the slit and under the tension spring.
3. Insert the bobbin case back into the sewing machine.
4. Close the bobbin compartment cover.

Step 4: Threading the Machine and Starting to Sew

1. Thread the top part of the machine following your machine’s threading guide.
2. Pull up the bobbin thread by turning the handwheel towards you.
3. Hold both the top and bobbin threads back and start sewing your project.

Tips for Beginners

• Always use the correct type and size of bobbin for your sewing machine.
• Ensure the bobbin is wound evenly to avoid thread tangles.
• Consult your sewing machine’s manual for specific instructions related to your model.

Troubleshooting

• If the thread is not feeding properly, check if the bobbin is inserted correctly.
• Ensure the bobbin tension is properly adjusted if you experience stitching issues.