Korbond Knee and Elbow Patches, Pack of 2

Description

How to Use Korbond Knee & Elbow Patches

Materials Needed

• Korbond Knee & Elbow Patches
• Iron
• Ironing board or a flat, heat-resistant surface
• Clean cloth or pressing cloth

Instructions

Step 1: Prepare the Fabric

• Lay the garment on a flat surface with the damaged area facing up.
• Ensure the area where you will apply the patch is clean and dry.

Step 2: Position the Patch

• Remove the patch from the packaging.
• Place the patch over the damaged area, ensuring it covers the entire hole or tear.
• Adjust the patch so it is aligned properly with the fabric grain.

Step 3: Iron the Patch

• Preheat your iron to the cotton setting or a temperature appropriate for the garment.
• Place a clean cloth or pressing cloth over the patch to protect it.
• Press the iron firmly over the patch with steady pressure for 15-20 seconds.
• Lift the iron and allow the patch to cool for a moment.
• Check if the patch is securely attached; if not, repeat the ironing process.

Step 4: Final Check

• Ensure the patch is firmly adhered to the garment with no loose edges.
• If necessary, iron again with the pressing cloth to reinforce the attachment.

Tips

• Test the iron’s heat on a small, inconspicuous area of the fabric before applying the patch.
• For extra reinforcement, sew around the edges of the patch after ironing.