KORBOND BLACK HEMMING WEB, 10 METERS

How to Use KORBOND Hemming Web 10M – Black

Materials Needed

• KORBOND Hemming Web 10M – Black
• Iron
• Ironing board or flat surface
• Scissors
• Fabric or garment you wish to hem

Step-by-Step Instructions

1. Prepare Your Fabric

• Lay your fabric or garment flat on an ironing board or other heat-resistant surface.
• Decide the length you want for the hem and fold the fabric accordingly.
• Press the fold with an iron to create a crease.

2. Cut the Hemming Web

• Measure the length of the hem and cut a piece of hemming web to fit.

3. Position the Hemming Web

• Place the hemming web between the folded fabric layers. Ensure it lies flat and even along the entire hem length.

4. Iron the Hem

• Set your iron to a suitable temperature for the fabric you are working with (refer to the fabric’s care label).
• Press the iron firmly over the folded hem area. Hold for a few seconds to allow the hemming web to melt and bond the fabric layers together.
• Move the iron along the hem, ensuring each section is bonded before moving to the next.

5. Check Your Hem

• Allow the fabric to cool down briefly.
• Check the hem to ensure it is secure. If necessary, repeat the ironing process on any sections not fully bonded.

Additional Tips

• Test the hemming web on a scrap piece of fabric to check the temperature settings and bonding strength.
• For delicate fabrics, use a pressing cloth between the iron and the fabric to prevent damage.