KORBOND 20M Hemming Tape
Roll over image to zoom in
How to Use KORBOND Hemming Web 20M
Materials Needed
- KORBOND Hemming Web 20M
- Iron
- Pressing cloth or thin towel
- Measuring tape
- Scissors
Step-by-Step Instructions
Step 1: Prepare the Fabric
- Lay the garment or fabric piece flat on a clean surface.
- Measure the desired length of the hem and mark it with chalk or a fabric pen.
- Fold the fabric to the marked line to create a neat edge.
Step 2: Cut the Hemming Web
- Unroll the KORBOND Hemming Web.
- Measure and cut a piece of hemming web that fits the length of the hem.
Step 3: Position the Hemming Web
- Place the hemming web between the folded hem and the main fabric.
- Ensure the web is aligned evenly along the length of the hem.
Step 4: Iron the Hem
- Set your iron to the appropriate temperature for the fabric type.
- Place a pressing cloth or thin towel over the hem area to protect the fabric.
- Press the iron firmly over the hem area for about 10-15 seconds.
- Move the iron along the hem, applying pressure and heat evenly.
Step 5: Finish the Hem
- Allow the hem to cool for a few minutes.
- Check to ensure the hem is securely bonded.
- If necessary, repeat the ironing process for any areas not fully adhered.
Tips for Best Results
- Test on a small, inconspicuous area of the fabric if unsure about the heat setting.
- Make sure the fabric is completely dry before applying the hemming web.
Loading...
Reviews
There are no reviews yet.