KORBOND 10-METER HEMMING TAPE

Description

How to Use KORBOND HEMMING WEB 10MTR

What You Will Need

• KORBOND HEMMING WEB 10MTR
• Iron
• Ironing board
• Scissors
• Fabric or garment to hem

Step-by-Step Instructions

Step 1: Prepare the Fabric

• Lay the fabric or garment flat on the ironing board.
• Identify the edge you wish to hem.
• Ensure the edge is clean and free from frays.

Step 2: Cut the Hemming Web

• Measure the length of the edge you wish to hem.
• Cut a piece of the hemming web to match this length.

Step 3: Position the Hemming Web

• Fold the fabric edge up to the desired hem length.
• Place the hemming web between the folded edge and the main fabric.

Step 4: Apply Heat

• Preheat your iron to a medium setting without steam.
• Gently press the iron over the folded edge, applying heat evenly.
• Hold the iron for a few seconds on each section to ensure the web adheres.

Step 5: Check the Hem

• Allow the fabric to cool slightly.
• Check that the hem is secure and the web has fused properly.
• If necessary, apply additional heat to any areas not fully adhered.

Tips for Best Results

• Test the hemming web on a scrap piece of fabric first.
• Ensure the iron does not have steam active during application.
• Avoid moving the fabric until it has cooled to prevent misalignment.