HOZELOCK 2247 MIXER TAP ADAPTOR

Description

How to Use the HOZELOCK MIXER TAP CONNECTOR 2247

Introduction

The HOZELOCK MIXER TAP CONNECTOR 2247 is designed to connect your garden hose to indoor mixer taps for convenient water access. Follow these instructions for easy setup and use.

Components

• HOZELOCK MIXER TAP CONNECTOR 2247
• Instruction Manual

Step-by-Step Instructions

1. Prepare the Tap

• Ensure the tap is clean and free from any debris.
• Remove any existing fittings from the tap.

2. Attach the Connector

• Take the HOZELOCK MIXER TAP CONNECTOR 2247.
• Slide the connector’s rubber fitting over the tap spout.
• Tighten the securing ring to ensure a snug fit.

3. Connect the Hose

• Attach the garden hose to the other end of the tap connector.
• Ensure the hose is firmly connected to avoid any leaks.

4. Turn on the Water

• Slowly turn on the tap to start the water flow.
• Check for any leaks around the connector and adjust if necessary.

5. Usage

• Use the hose as needed for watering plants, cleaning, etc.
• Adjust the water flow from the tap for desired pressure.

6. Detaching the Connector

• After use, turn off the tap completely.
• Disconnect the hose from the connector.
• Carefully remove the connector from the tap.

Maintenance Tips

• Regularly check the rubber fitting for wear and tear.
• Store the connector in a dry place when not in use to prolong its life.

Troubleshooting

• If you notice leaks, ensure the connector is properly tightened.
• Contact customer support if the connector does not fit your tap.