**Hex Bolts**: These are bolts with a hexagonal head designed to be tightened with a wrench. The hex shape provides easy gripping from multiple angles

How to Use Hex Bolts & Nuts Zinc M8 x 100mm

Materials Needed

• Hex Bolts & Nuts Zinc M8 x 100mm
• Wrench or socket set
• Screwdriver (optional)
• Measuring tape
• Drill (if necessary)

Steps to Follow

1. Preparation

• Identify the materials or parts that need to be fastened together.
• Ensure the surfaces are clean and align them properly.
• If necessary, pre-drill holes into the materials using a drill, ensuring the hole diameter is slightly smaller than the bolt diameter (M8).

2. Inserting the Bolt

• Insert the bolt into the aligned holes of the materials.
• Push the bolt through until the threaded end is visible on the other side.

3. Securing with the Nut

• Place the nut on the threaded end of the bolt.
• Hand-tighten the nut to ensure it fits snugly against the material surface.

4. Tightening the Bolt and Nut

• Use a wrench or socket set to hold the bolt head in place.
• With another wrench, tighten the nut by turning it clockwise until it is secure. Be careful not to overtighten, as this may damage the materials.

5. Final Check

• Confirm that the bolt and nut are securely fastened and the materials are properly aligned.
• Ensure there is no movement or loosening of the fastened parts.