HARRIS PREMIUM SNAPOFF KNIFE FOR WALLPAPER HANGING

Description

How to Use the Harris Seriously Good Paper Hanging Snap-Off Knife

Introduction

This guide provides step-by-step instructions for beginners on how to safely and effectively use the Harris Seriously Good Paper Hanging Snap-Off Knife.

Materials Needed

• Harris Seriously Good Paper Hanging Snap-Off Knife
• Protective gloves
• Cutting mat or safe cutting surface
• Paper or wallpaper to cut

Safety Precautions

• Always wear protective gloves to avoid accidental cuts.
• Ensure the area is well-lit to clearly see your cutting lines.
• Keep fingers away from the blade while cutting.
• Always cut on a stable surface to prevent slips.

Instructions

Step 1: Prepare Your Workspace

• Clear your workspace of any clutter.
• Place a cutting mat or a safe cutting surface where you plan to work.

Step 2: Extend the Blade

• Hold the knife handle securely.
• Locate the blade extension slider on the side of the knife.
• Carefully slide the blade forward to the desired length.
• Ensure the blade locks into place.

Step 3: Make the Cut

• Position the paper or wallpaper on the cutting surface.
• Line up the knife blade with your intended cutting line.
• Apply steady pressure and push the knife forward to make the cut.
• Always cut away from your body.

Step 4: Snap Off the Blade

• When the blade becomes dull, use the snap-off mechanism.
• Find the snap-off notch at the end of the handle or use pliers.
• Carefully snap off the dull section of the blade.
• Dispose of the snapped-off piece safely.

Maintenance Tips

• Regularly check the blade for sharpness and replace when necessary.
• Keep the knife dry and clean after use to prevent rust.
• Store the knife with the blade retracted to ensure safety.

Conclusion

By following these instructions, you can safely and effectively use the Harris Seriously Good Paper Hanging Snap-Off Knife for your cutting needs.