HARRIS HIGH-QUALITY SHORT PILE SLEEVE FOR WALLS & CEILINGS, 9 INCH / 230MM

Description

How to Use the Harris Seriously Good Walls & Ceilings Sleeve Short Pile 9 Inch / 230mm

Step 1: Gather Your Materials

• Harris Seriously Good Walls & Ceilings Sleeve Short Pile 9 Inch / 230mm
• Paint Roller Frame
• Paint Tray
• Your Choice of Paint
• Stirrer
• Drop Cloth or Protective Sheeting
• Painter’s Tape (optional)
• Old Clothes or Apron

Step 2: Prepare the Area

• Lay down the drop cloth or protective sheeting to cover the floor and any furniture.
• Use painter’s tape to mask off areas you do not want painted, like trim or edges (optional).
• Ensure the surface you are painting is clean and dry.

Step 3: Assemble the Roller

• Attach the Harris Seriously Good Walls & Ceilings Sleeve to the roller frame.
• Ensure the sleeve is securely attached and spins freely on the frame.

Step 4: Prepare the Paint

• Open your paint can and use a stirrer to mix the paint thoroughly.
• Pour a small amount of paint into the paint tray.

Step 5: Load the Roller

• Dip the roller sleeve into the paint tray, rolling it back and forth to evenly coat the sleeve.
• Tap off any excess paint by rolling on the ridged section of the tray.

Step 6: Begin Painting

• Start painting by rolling the sleeve onto the wall or ceiling in a ‘W’ or ‘M’ motion.
• Fill in the spaces by rolling over the area with consistent pressure for an even coat.
• Reload the roller with paint as needed and continue until the surface is covered.

Step 7: Finishing Touches

• Allow the paint to dry according to the paint manufacturer’s instructions.
• Apply additional coats if necessary for full coverage.
• Remove painter’s tape while the paint is still slightly damp to prevent peeling.
• Clean the roller sleeve and frame with water or appropriate solvent after use.

Step 8: Clean Up

• Dispose of any paint waste according to local regulations.
• Store leftover paint properly for future use.
• Remove drop cloths and clean the area.