FELT GARD Heavy-Duty Felt Strips 150mm x 13mm, Pack of 9

Description

How to Use FELT GARD Heavy Duty Felt Strips

Introduction

FELT GARD heavy duty felt strips are designed to protect surfaces from scratches and reduce noise caused by moving objects. Follow these instructions to effectively use the felt strips.

Materials Needed

• FELT GARD heavy duty felt strips (150mm x 13mm)
• Scissors (if trimming is necessary)
• Cleaning solution (optional)
• Cloth or paper towel

Steps to Apply Felt Strips

1. Prepare the Surface

• Identify the areas where you want to apply the felt strips.
• Ensure that these surfaces are clean, dry, and free from dust or debris.
• Use a cleaning solution and a cloth or paper towel if necessary to clean the surfaces.

2. Measure and Cut (if necessary)

• If the felt strips need to be smaller, measure the required length.
• Use scissors to trim the felt strip to the desired size.

3. Apply the Felt Strips

• Peel off the backing from the adhesive side of the felt strip.
• Carefully place the felt strip onto the surface, ensuring it is aligned correctly.
• Press down firmly to ensure the felt strip adheres properly.

4. Check and Adjust

• Check to see if the felt strip is securely attached and adjust if necessary.
• Repeat the process for any additional areas requiring felt strips.

Maintenance Tips

• Regularly check the condition of the felt strips and replace them if they show signs of wear.
• Clean the surfaces and felt strips periodically to maintain their effectiveness.