FAST PAK VALUE 9969 2” (50MM) ALUMINIUM DOOR BOLT – SINGLE PACK

How to Use the FAST PAK VALUE 9969 2” (50MM) Aluminium Door Bolt

Introduction

The FAST PAK VALUE 9969 Aluminium Door Bolt is a straightforward security solution designed to provide additional safety to your doors. Follow the steps below to ensure correct installation and usage.

Tools Required

• Screwdriver
• Drill (optional, if pre-drilling holes)
• Pencil
• Measuring tape

Installation Steps

1. Unpack the door bolt from its packaging.
2. Select the desired location on the door where you wish to install the bolt. Typically, this is on the edge of the door at a suitable height.
3. Use the measuring tape to ensure the bolt is aligned and level.
4. Mark the position of the screw holes with a pencil.
5. If necessary, pre-drill holes to make screw insertion easier.
6. Align the bolt with the marked positions and use the screwdriver to secure the screws into the door.
7. Ensure the bolt slides smoothly into the catch or strike plate on the door frame.

Usage

1. To lock the door, slide the bolt into the catch or strike plate.
2. To unlock, slide the bolt back to its original position.

Maintenance Tips

• Regularly check that the screws are tight and secure.
• Apply lubricant to the sliding mechanism if the bolt becomes stiff.
• Keep the bolt and catch area free of debris to ensure smooth operation.

Safety Precautions

• Ensure the door bolt is within reach for all intended users.
• Do not force the bolt if it does not slide easily, as this may cause damage.