FAST PAK VALUE 8541 4.0 X 14MM ALUMINUM DOME POP RIVETS, PACK OF 12
Roll over image to zoom in
How to Use FAST PAK VALUE 8541 Aluminium Dome Pop Rivet
Materials Needed
- FAST PAK VALUE 8541 Aluminium Dome Pop Rivets
- Drill and drill bits (4.0 mm size)
- Rivet gun
- Safety goggles
- Work gloves
Step-by-Step Instructions
Step 1: Prepare the Materials
- Ensure you have all necessary tools and materials ready.
- Wear safety goggles and gloves to protect yourself during the process.
Step 2: Mark and Drill Holes
- Align the materials you want to join.
- Mark the spots where you will place the rivets.
- Use the 4.0 mm drill bit to create holes at the marks.
Step 3: Insert the Rivet
- Insert the shaft of the pop rivet through the hole in the materials.
- Ensure the domed head of the rivet is flush against the surface.
Step 4: Use the Rivet Gun
- Place the rivet gun over the rivet’s mandrel (the long pin).
- Squeeze the handle of the rivet gun until the mandrel snaps, securing the rivet in place.
Step 5: Inspect the Rivet
- Check to ensure the materials are securely joined.
- Confirm that the rivet head is properly seated and flush against the material.
Tips
- Make sure the drill bit size matches the rivet size for a snug fit.
- Practice using the rivet gun on scrap material to gain confidence.
Loading...
Product Location
-
£0.94
Reviews
There are no reviews yet.