FAST PAK VALUE 8473 Black Door Stops 1 1/8” – Pack of 3

Description

How to Use FAST PAK VALUE 8473 1 1/8” Door Stops

Introduction

The FAST PAK VALUE 8473 door stops are designed to protect walls and prevent doors from swinging too far. This guide will help beginners install and use these door stops effectively.

Contents of the Pack

• 3 Black Door Stops
• Installation Screws

Tools Required

• Drill
• Screwdriver
• Measuring Tape
• Pencil

Installation Instructions

1. Determine Placement: Use a measuring tape to determine the best location for the door stop on the wall or floor behind the door.
2. Mark the Spot: Use a pencil to mark the spot where the door stop will be installed.
3. Drill Pilot Hole: Use a drill to create a pilot hole at the marked spot. This will make it easier to insert the screws.
4. Attach the Door Stop: Align the door stop with the pilot hole and use a screwdriver to secure it in place with the provided screws.
5. Test the Door: Open the door to ensure the door stop is in the correct position and is effectively preventing the door from swinging too far.

Maintenance Tips

• Regularly check the door stop for looseness and tighten the screws if necessary.
• Clean the door stop with a damp cloth to keep it free from dust and debris.

Safety Precautions

• Ensure that the door stop is securely installed to prevent it from becoming a tripping hazard.
• Do not use excessive force when opening the door against the stop to avoid damage.