FAST PAK VALUE 8442 3” (75MM) CORNER PLATES, PACK OF 2
Roll over image to zoom in
How to Use FAST PAK VALUE 8442 3”(75MM) Corner Plates
Introduction
Corner plates are typically used to reinforce corners in wood or metal constructions. They help in providing additional strength and stability to joints.
Required Tools
- Drill
- Screwdriver
- Measuring tape
- Marker or pencil
- Screws (appropriate for your material)
Instructions
Step 1: Prepare the Area
- Identify the corner where you want to install the corner plates.
- Ensure the surfaces are clean and free of debris.
Step 2: Mark the Drill Points
- Position the corner plate on the corner, aligning it properly.
- Use a marker or pencil to mark the screw holes on both surfaces.
Step 3: Drill the Holes
- Using the drill, create small pilot holes at the marked points. This will make it easier to insert the screws.
Step 4: Attach the Corner Plate
- Place the corner plate back onto the corner, aligning it with the pilot holes.
- Insert screws into the holes and tighten them using a screwdriver until the plate is securely attached.
Step 5: Check the Installation
- Ensure the corner plate is firmly in place and that the screws are tightened properly.
- Check for any movement or instability in the joint.
Your corner plate is now installed and should provide additional support to the corner joint.
Loading...
Product Location
-
£1.09
Reviews
There are no reviews yet.