FAST PAK VALUE 3752 M10 X 135 NYLON FRAME FIXINGS, PACK OF 2

Description

How to Use FAST PAK VALUE 3752 M10 X 135 Nylon Frame Fixings

Introduction

The FAST PAK VALUE 3752 M10 X 135 Nylon Frame Fixings are designed for securing frames to solid materials like concrete and masonry. This guide will help beginners understand how to use these fixings effectively.

Tools Required

• Drill
• M10 Drill Bit
• Hammer
• Screwdriver
• Measuring Tape
• Pencil or Marker
• Safety Goggles

Steps to Use

1. Safety First

• Wear safety goggles to protect your eyes from dust and debris.

2. Prepare the Surface

• Ensure the surface where the frame will be attached is clean and dry.
• Use a measuring tape to determine the correct placement of the fixings.
• Mark the drilling points on the surface with a pencil or marker.

3. Drilling Holes

• Attach the M10 drill bit to your drill.
• Drill holes at the marked points to the depth of 135mm.
• Ensure the holes are straight and clean out any debris.

4. Insert Fixings

• Insert one nylon frame fixing into each drilled hole.
• Use a hammer to gently tap the fixing into place until it is flush with the surface.

5. Secure the Frame

• Align the frame with the fixings in the wall.
• Use a screwdriver to tighten the screws, securing the frame to the wall.
• Ensure the frame is firmly attached and does not wobble.

Conclusion

By following these steps, you can securely install frames using the FAST PAK VALUE 3752 M10 X 135 Nylon Frame Fixings. Always ensure you are using the appropriate tools and safety equipment when working with fixings.