FAST PAK VALUE 3554 BROWN MODESTY BLOCKS, PACK OF 10

How to Use FAST PAK VALUE 3554 Modesty Blocks

Introduction

Modesty blocks are essential components for connecting panels or boards, often used in cabinetry or furniture assembly. Follow the steps below to effectively use them.

Materials Needed

• FAST PAK VALUE 3554 Modesty Blocks
• Screwdriver
• Screws compatible with the modesty blocks
• Drill (optional, if pre-drilling holes)
• Pencil

Step-by-Step Instructions

Step 1: Prepare the Panels

1. Align the panels or boards that you need to connect.
2. Ensure that the surfaces are clean and free from debris.

Step 2: Position the Modesty Blocks

1. Place the modesty block at the desired position where the panels meet.
2. Use a pencil to mark the screw hole positions on both panels.

Step 3: Drill Pilot Holes (Optional)

1. If the material is hard or dense, use a drill to create pilot holes at the marked positions. This will make screwing easier and prevent splitting.

Step 4: Attach the Modesty Block

1. Align the modesty block with the marked positions.
2. Use compatible screws and a screwdriver to secure the block in place.
3. Ensure that the block is tightly fixed, but be careful not to overtighten.

Step 5: Repeat as Necessary

1. If joining more than two panels, repeat the above steps for each additional connection point.

Conclusion

Once all modesty blocks are securely fastened, check the stability of the structure. Make any necessary adjustments to ensure that everything is aligned and secure.