FAST PAK VALUE 2779 8 x 1 1/4″ Brass Pozi Screws, Pack of 12

How to Use FAST PAK VALUE 2779 8 X 1 1/4” Brassed CKS Pozi Screws

Tools Required

• Pozi screwdriver
• Drill (optional)
• Measuring tape
• Pencil

Preparation

1. Ensure you have all the necessary tools and materials ready.
2. Measure and mark the exact position where the screw will be inserted using a measuring tape and pencil.

Drilling Pilot Holes (if necessary)

1. If working with hard or dense materials, use a drill to create a pilot hole slightly smaller than the diameter of the screw.
2. This helps prevent the material from splitting and makes the insertion easier.

Inserting the Screw

1. Align the screw with the marked position or pilot hole.
2. Use the Pozi screwdriver to drive the screw into the material.
3. Apply steady pressure and maintain a straight angle to ensure the screw goes in smoothly.
4. Continue until the screw head is flush with the surface.

Finishing Up

• Check that the screw is securely fastened.
• Ensure there are no protruding parts for a clean finish.
• Repeat the process for additional screws as necessary.