FAST PAK VALUE 2656 1/2” Tap Washers – Pack of 10

Description

How to Use FAST PAK VALUE 2656 1/2” Tap Washers

Introduction

Tap washers are essential components used to prevent leaks at the tap junction. These 1/2” tap washers are suitable for various plumbing applications.

Materials Needed

• FAST PAK VALUE 2656 1/2” Tap Washers
• Adjustable wrench or spanner
• Flathead screwdriver
• Cloth or towel
• Bucket (optional)

Step-by-Step Instructions

1. Turn Off the Water Supply

• Locate the water shut-off valve under the sink or near the main water supply.
• Turn the valve clockwise to stop the water flow.

2. Release Any Remaining Water

• Turn on the tap to release any water trapped in the pipes.
• Use a bucket to catch the water if necessary.

3. Remove the Tap Handle

• Use a flathead screwdriver to remove the screw securing the tap handle.
• Carefully lift the tap handle off to expose the valve.

4. Remove the Valve Cover

• Use an adjustable wrench to unscrew the valve cover.
• Set aside the valve cover carefully.

5. Replace the Old Washer

• Remove the old washer using the flathead screwdriver.
• Replace it with a new FAST PAK VALUE 2656 1/2” Tap Washer.

6. Reassemble the Tap

• Replace the valve cover and tighten it with the wrench.
• Reattach the tap handle and secure it with the screw.

7. Turn On the Water Supply

• Turn the water shut-off valve counterclockwise to restore the water flow.

8. Test the Tap

• Turn the tap on and off to ensure there are no leaks and that it functions smoothly.

Conclusion

Regularly replacing tap washers can prevent leaks and extend the life of your plumbing fixtures. Ensure proper installation by following these steps.