FAST PAK VALUE 2373 BRASS FINISH SPRING DOOR STOP

Description

How to Use the FAST PAK VALUE 2373 SPRING DOOR STOP BRASSED

Introduction

The FAST PAK VALUE 2373 Spring Door Stop Brassed is a practical and easy-to-install solution for protecting your walls from door damage. Follow these simple steps to install and use this product effectively.

Materials Needed

• FAST PAK VALUE 2373 Spring Door Stop Brassed
• Screwdriver
• Drill (optional for harder surfaces)
• Pencil

Installation Steps

Step 1: Choose the Installation Location

• Locate the area on the wall where the door handle usually makes contact when opened.
• Ensure the surface is clean and dry.

Step 2: Mark the Spot

• Use a pencil to mark the exact spot where the door stop will be installed.
• Ensure the mark is at an appropriate height to intercept the door handle.

Step 3: Attach the Door Stop

• Align the base of the spring door stop with the pencil mark on the wall.
• Use a screwdriver to fasten the screw through the base into the wall.
• If necessary, use a drill to create a pilot hole for easier installation on hard surfaces.

Step 4: Test the Door Stop

• Gently open the door to ensure the door stop effectively prevents the handle from hitting the wall.
• Adjust the position if necessary for optimal protection.

Maintenance Tips

• Periodically check the door stop for any signs of wear or loosening.
• Tighten the screw if the door stop becomes loose over time.
• Clean with a soft cloth to maintain the brass finish.

Safety Precautions

• Ensure the door stop is securely fastened to prevent damage to the wall or door.
• Use appropriate tools and handle them carefully during installation.