FAST PAK VALUE 2364 M6 X 34 METAL DOWEL FOR CAMS – PACK OF 4

How to Use FAST PAK VALUE 2364 M6 X 34 Metal Dowel for Cams

Introduction

This guide will help you properly use the FAST PAK VALUE 2364 M6 X 34 metal dowel for cams. These dowels are designed for securing components together with cams, commonly used in furniture assembly.

Tools Required

• Screwdriver
• Allen Key (if applicable)
• Measuring Tape

Steps to Use

Step 1: Prepare the Components

• Identify the parts of the furniture or object that require assembly using metal dowels and cams.
• Ensure all components are clean and free from obstructions.

Step 2: Insert the Metal Dowel

• Locate the pre-drilled hole on the furniture piece where the dowel will be inserted.
• Insert the M6 x 34 metal dowel into the hole until it is seated firmly. Use gentle pressure to avoid damaging the dowel or surrounding area.

Step 3: Align the Cam

• Position the corresponding piece with the cam hole over the inserted dowel.
• Ensure the cam is aligned to receive the dowel properly.

Step 4: Secure the Cam

• Insert the cam into its designated hole.
• Using a screwdriver or Allen key, turn the cam clockwise to lock it onto the dowel.
• Ensure the connection is tight and secure, but do not overtighten to prevent damage.

Final Checks

• Verify all connections are secure and stable.
• Test the assembled piece for stability and ensure it meets the intended design and function.

Safety Tips

• Always use appropriate tools to avoid injury.
• Work on a stable surface to prevent accidents.
• Follow the manufacturer’s instructions for specific assembly requirements.