FAST PAK VALUE 2357 M6 X 24 METAL DOWEL FOR CAMS, PACK OF 4

Description

How to Use the FAST PAK VALUE 2357 M6 X 24 Metal Dowel for Cams

Introduction

The FAST PAK VALUE 2357 M6 X 24 Metal Dowel is designed for use in conjunction with cam lock fittings in furniture assembly. This guide will provide the basic steps for using these dowels effectively.

Tools Required

• Screwdriver
• Allen key (if applicable)
• Rubber mallet (optional)

Step-by-Step Instructions

Step 1: Prepare the Components

• Ensure you have all parts of your furniture, including the panels and the cam lock fittings.
• Identify the holes where the metal dowels will be inserted.

Step 2: Insert the Metal Dowels

• Take one M6 X 24 metal dowel from the pack.
• Insert it into the pre-drilled hole in the furniture panel. Ensure it fits snugly.
• If necessary, gently tap the dowel with a rubber mallet to secure it in place.

Step 3: Align the Components

• Align the panel with the metal dowel to the corresponding panel with the cam lock fitting.
• Ensure the dowel fits into the hole of the cam lock fitting.

Step 4: Secure the Connection

• Using a screwdriver or an Allen key, turn the cam lock fitting to tighten it around the metal dowel.
• Ensure the connection is tight and the panels are flush.

Tips for Best Results

• Double-check the alignment of all pieces before tightening the cam locks.
• Use a rubber mallet if manual insertion of dowels is difficult, but avoid excessive force.
• Refer to the furniture assembly manual for specific instructions related to your furniture model.

Safety Precautions

• Always handle tools with care to avoid injury.
• Ensure that the furniture is stable and secure once assembled.

By following these instructions, you can effectively use the FAST PAK VALUE 2357 M6 X 24 Metal Dowel for your furniture assembly projects.