FAST PAK VALUE 2326 10MM MINIATURE CAM LOCKS, PACK OF 4

How to Use FAST PAK VALUE 2326 10MM MINI CAM LOCKS

Introduction

The FAST PAK VALUE 2326 10MM MINI CAM LOCKS are designed to provide security for small cabinets, drawers, and boxes. This guide will walk you through the steps to properly install and use these locks.

Unpack the Product

1. Open the package carefully.
2. Ensure that you have all components: 4 mini cam locks, keys for each lock, and any additional mounting hardware.

Determine Installation Location

1. Select the cabinet, drawer, or box where you wish to install the mini cam locks.
2. Ensure that the thickness of the material is suitable for a 10mm lock.

Prepare for Installation

1. Identify the location on the door or drawer face where the lock will be installed.
2. Mark the position for drilling based on the lock’s diameter (10mm).
3. Ensure there is no obstruction on the inside of the cabinet or drawer that will interfere with lock operation.

Install the Mini Cam Locks

1. Drill a hole at the marked position using a 10mm drill bit.
2. Insert the cam lock through the hole from the front side of the cabinet or drawer.
3. Secure the lock in place using the provided mounting hardware, such as a nut or clip.
4. Attach the cam to the lock body and adjust its position to ensure it engages properly with the cabinet or drawer frame.

Test the Lock

1. Insert the key into the lock.
2. Turn the key to engage and disengage the lock, ensuring smooth operation.
3. Make any necessary adjustments to the cam position if the lock does not secure properly.

Maintain the Locks

• Keep the keys in a safe place to prevent loss.
• Regularly check the locks for any signs of wear or damage.
• Lubricate the locks occasionally to ensure smooth operation.

By following these instructions, you will ensure the secure installation and operation of your FAST PAK VALUE 2326 10MM MINI CAM LOCKS.