FAST PAK VALUE 1390 1.5MM GREY CABLE CLIPS FOR T&E, PACK OF 35

How to Use FAST PAK VALUE 1390 1.5MM Cable Clips

What You Will Need

• FAST PAK VALUE 1390 1.5MM Cable Clips
• Hammer
• Measuring tape
• Pencil or marker
• Appropriate cables (e.g., T & E cables)

Preparation

1. Unpack the cable clips from the packaging. There should be 35 clips per pack.
2. Identify the path where the cables will be secured.
3. Use a measuring tape to plan the spacing of the clips. It is generally recommended to place clips at intervals of 30-50 cm (12-20 inches) for optimal support.
4. Mark the positions where each clip will be installed using a pencil or marker.

Installation

1. Place the cable within the clip, ensuring it fits snugly.
2. Align the clip with the marked position on the surface.
3. Using a hammer, gently tap the nail of the clip into the surface until it is secure. Be careful not to overdrive the nail, as this may damage the clip or the surface.
4. Repeat this process for each clip along the cable path.

Final Checks

• Ensure all clips are securely fastened and holding the cable in place without pinching or damaging it.
• Double-check the alignment and spacing of the clips to ensure the cable is tidy and well-supported.

Safety Tips

• Always wear safety goggles when using a hammer to protect your eyes from potential splinters or debris.
• Ensure the area is free from electrical hazards before installation.