FAST PAK VALUE 1086 20MM GALVANIZED FELT NAILS – 80 GRAMS PER PACK

Description

How to Use FAST PAK VALUE 1086 20MM GALV FELT NAILS

Introduction

FAST PAK VALUE 1086 20MM GALV FELT NAILS are used for attaching roofing felt and other similar materials to wooden structures. Follow these instructions to ensure proper usage.

Materials Needed

• FAST PAK VALUE 1086 20MM GALV FELT NAILS (80 grams per pack)
• Hammer or nail gun
• Roofing felt or similar material
• Timber or wooden structure
• Measuring tape
• Pencil or marker (for marking)
• Safety goggles and gloves

Instructions

Step 1: Prepare Your Workspace

• Ensure your work area is clean and free from any hazards.
• Wear safety goggles and gloves to protect yourself.

Step 2: Measure and Mark

• Use a measuring tape to determine where the felt needs to be attached.
• Mark the points where nails will be placed, ensuring they are evenly spaced.

Step 3: Position the Felt

• Lay the roofing felt over the area to be covered, ensuring it is flat and aligned properly.

Step 4: Nail the Felt

• Using a hammer or nail gun, securely fasten the felt using the 20mm galvanized felt nails.
• Start from one end and work your way to the other, ensuring nails are driven in straight and flush with the surface.
• Refer to your marks to maintain even spacing between nails.

Step 5: Final Check

• Inspect the nailed area to ensure all nails are secure and the felt is tightly attached.
• Make any necessary adjustments or add additional nails if needed.

Safety Tips

• Always use protective gear when handling nails and using tools.
• Ensure your work area is stable and secure to prevent accidents.
• Keep nails and tools out of reach of children.