EVERBUILD STICK2 30ML Instant Bond Contact Adhesive

Description

How to Use EVERBUILD STICK2 INSTANT BOND CONTACT ADHESIVE 30ML

Materials Needed

• EVERBUILD STICK2 INSTANT BOND CONTACT ADHESIVE 30ML
• Clean cloth
• Protective gloves
• Well-ventilated area

Preparation

1. Ensure you are working in a well-ventilated area to avoid inhaling fumes.
2. Put on protective gloves to protect your skin from the adhesive.
3. Make sure the surfaces to be bonded are clean, dry, and free from dust and grease. Use a clean cloth if necessary.

Application

1. Open the adhesive tube carefully.
2. Apply a thin, even layer of adhesive to both surfaces that need to be bonded.
3. Allow the adhesive to dry for a few minutes until it feels tacky to touch.

Bonding

1. Carefully align the surfaces to be bonded.
2. Press them firmly together, applying even pressure across the bonded area.
3. Hold the surfaces together for a few seconds to ensure a strong bond.

Cleaning

1. Immediately clean any excess adhesive using a suitable solvent while it is still wet.
2. Seal the adhesive tube properly after use to prevent drying out.

Safety Precautions

• Store the adhesive in a cool, dry place away from children and pets.
• Avoid contact with skin and eyes. If contact occurs, rinse immediately with water and seek medical advice if necessary.