EVERBUILD MULTI-PURPOSE FILLER POWDER 600GM

How to Use EVERBUILD All Purpose Filler Powder 600GM

Materials Needed

• EVERBUILD All Purpose Filler Powder 600GM
• Mixing bowl
• Water
• Spatula or putty knife
• Sandpaper (optional)
• Clean cloth

Step-by-Step Instructions

1. Preparation

• Ensure the surface to be filled is clean, dry, and free from loose material.
• Use a clean cloth to wipe away any dust or debris.

2. Mixing the Filler

• Open the EVERBUILD All Purpose Filler Powder container.
• In a mixing bowl, gradually add the filler powder.
• Add water slowly and mix thoroughly to achieve a smooth, paste-like consistency.
• Avoid making the mixture too runny; adjust by adding more powder if necessary.

3. Applying the Filler

• Using a spatula or putty knife, apply the filler to the area that needs repairing.
• Spread the filler evenly across the surface, pressing firmly to fill any gaps or holes.
• Smooth out the surface with the spatula, removing any excess filler.

4. Drying

• Allow the filler to dry completely. Drying time may vary based on the thickness of the application and environmental conditions.
• Refer to the product packaging for specific drying times.

5. Finishing Touches

• If needed, sand the filled area gently to achieve a smooth finish.
• Wipe the area with a clean cloth to remove any dust from sanding.

Tips

• Mix only the amount of filler you can use within 30 minutes to avoid waste.
• Apply the filler in layers if filling a deep hole, allowing each layer to dry before adding the next.