EVERBUILD 290ML COVING ADHESIVE AND JOINT FILLER

How to Use EVERBUILD Coving Adhesive & Joint Filler 290ml

Materials Needed

• EVERBUILD Coving Adhesive & Joint Filler 290ml
• Coving pieces
• Caulking gun
• Damp cloth
• Sandpaper
• Protective gloves (optional)

Step-by-Step Instructions

Preparation

• Ensure the surfaces to be bonded are clean, dry, and free from dust and grease.
• Wear protective gloves if desired to avoid skin contact.

Application

• Cut the tip of the cartridge at an angle to the desired bead size.
• Fit the cartridge into a caulking gun.
• Apply a continuous bead of adhesive along the back edges of the coving piece.
• Press the coving firmly into place, ensuring it is aligned correctly.
• Use a damp cloth to remove any excess adhesive immediately.

Finishing

• Allow the adhesive to set according to the manufacturer’s instructions, typically 24-48 hours.
• If necessary, sand any rough edges or excess dried adhesive for a smooth finish.

Cleanup

• Wipe tools and any spills with a damp cloth before the adhesive dries.
• Dispose of empty cartridge responsibly.

Safety Precautions

• Ensure adequate ventilation during use.
• Avoid prolonged contact with skin and eyes.
• In case of contact, rinse thoroughly with water.