Description
How to Use EVERBUILD SUPERGLUE INDUSTRIAL GENERAL USE 20G
1. Preparation
- Ensure the surfaces to be bonded are clean, dry, and free from dust, grease, and oil.
 - For best results, lightly sand the surfaces before applying the glue.
 - Have a damp cloth ready to clean up any excess glue immediately.
 - Open the product carefully, following any specific packaging instructions.
 
2. Application
- Apply a small amount of superglue to one of the surfaces. A little goes a long way.
 - Quickly press the two surfaces together, ensuring they are aligned correctly.
 - Apply even pressure for a few seconds to ensure a strong bond.
 
3. Curing
- Allow the bond to cure. The glue typically sets in seconds, but for full strength, leave it for 24 hours.
 - Avoid moving or putting stress on the bonded surfaces during this time.
 
4. Safety Tips
- Always use in a well-ventilated area to avoid inhaling fumes.
 - Wear protective gloves to prevent skin contact.
 - If glue comes into contact with skin, wash immediately with warm soapy water.
 - Keep out of reach of children and pets.
 
5. Storage
- After use, clean the nozzle and tightly replace the cap to prevent the glue from drying out.
 - Store in a cool, dry place away from direct sunlight.
 
				
    









Dimah (verified owner) –
So happy with the product! Everything was perfect – quality, delivery, and packaging were all top-notch.
Zainab (verified owner) –
Absolutely wonderful service and amazing products. The wholesaler’s attention to detail is what sets them apart from others. Will be buying again soon.
Taneem (verified owner) –
I’ve purchased from this wholesaler several times, and I’ve never had an issue. The products are always in excellent condition, and delivery is prompt.
Dinayah (verified owner) –
The products were perfect and the shipping was lightning fast. I couldn’t be more pleased with my experience with this wholesaler.