Ensure that the surfaces to be bonded are clean, dry, and free from dust or grease

How to Use 151 Multipurpose Adhesive Spray 500ml

Materials Needed

• 151 Multipurpose Adhesive Spray 500ml
• Protective gloves
• Protective eyewear
• Work surface or project material
• Drop cloth or newspaper (to protect surrounding areas)

Preparation

1. Ensure you are in a well-ventilated area.
2. Put on protective gloves and eyewear.
3. Lay down a drop cloth or newspaper to protect your work area from overspray.
4. Shake the spray can well for about 1-2 minutes to mix the adhesive thoroughly.

Application

1. Hold the spray can approximately 6-8 inches away from the surface you are applying the adhesive to.
2. Press down on the nozzle to spray a thin, even layer of adhesive onto the surface.
3. If adhering two surfaces, apply the adhesive to both surfaces for a stronger bond.
4. Wait for about 1-3 minutes for the adhesive to become tacky.

Bonding

1. Carefully align and press the surfaces together.
2. Apply firm pressure over the entire area to ensure a strong bond.
3. Allow the adhesive to cure fully according to the manufacturer’s instructions before putting the bonded item to use.

Cleanup

1. Clean the spray nozzle by spraying the can upside down for a few seconds to clear any remaining adhesive.
2. Dispose of used gloves and any waste materials appropriately.
3. Wash your hands thoroughly after use.

Safety Tips

• Do not inhale the spray. Use in a well-ventilated area.
• Avoid contact with skin and eyes.
• Keep out of reach of children.
• Do not use near open flames or heat sources.