DRAPER EXPERT 39264 Masonry Drill Bit 5 x 150mm

Description

How to Use the DRAPER EXPERT 39264 5 X 150MM Masonry Drill Bit

Materials Required

• DRAPER EXPERT 39264 5 x 150mm Masonry Drill Bit
• Electric Drill
• Protective Gear (Gloves, Safety Glasses)
• Masking Tape (optional)
• Pencil or Marker

Preparation

1. Ensure you have all the necessary materials listed above.
2. Wear your protective gear to ensure safety while drilling.
3. Mark the spot on the masonry surface where you intend to drill using a pencil or marker. For more precise drilling, you can place a piece of masking tape over the mark.

Installing the Drill Bit

1. Ensure that the electric drill is unplugged or turned off before proceeding.
2. Insert the DRAPER EXPERT 39264 drill bit into the drill’s chuck.
3. Tighten the chuck securely to hold the drill bit in place.

Drilling Process

1. Plug in or switch on your electric drill.
2. Align the drill bit with the marked spot on the masonry surface.
3. Start the drill at a low speed to create a pilot hole.
4. Once the pilot hole is established, increase the speed and apply steady pressure to continue drilling.
5. Periodically withdraw the drill bit to clear out dust and debris.

After Drilling

1. Carefully remove the drill bit from the hole.
2. Turn off or unplug the electric drill.
3. Clean the area and dispose of any debris safely.

Safety Tips

• Always wear protective gear to prevent injury.
• Ensure the drill bit is suitable for the material you are drilling.
• Do not apply excessive force to the drill as it may cause the bit to break.