DRAPER EXPERT 39263 5mm x 85mm Masonry Drill Bit

Description

How to Use the DRAPER EXPERT 39263 5 X 85MM Masonry Drill Bit

1. Gather Necessary Tools and Safety Equipment

• DRAPER EXPERT 39263 5 X 85MM Masonry Drill Bit
• Electric drill suitable for masonry drilling
• Safety goggles
• Dust mask
• Protective gloves

2. Prepare the Drill

1. Ensure the drill is unplugged or the battery is removed.
2. Insert the DRAPER masonry drill bit into the drill’s chuck.
3. Tighten the chuck securely to hold the drill bit in place.

3. Mark the Drilling Spot

1. Use a pencil or marker to indicate the exact spot on the masonry where you need to drill.
2. If needed, use a center punch to create a small indentation to guide the drill bit.

4. Set Up Safety Precautions

• Put on safety goggles to protect your eyes from debris.
• Wear a dust mask to avoid inhaling dust particles.
• Put on protective gloves for additional safety.

5. Start Drilling

1. Plug in the drill or insert the battery.
2. Set the drill to the correct speed setting for masonry.
3. Hold the drill firmly with both hands.
4. Position the drill bit on the marked spot.
5. Start drilling slowly to gain control, then increase speed as needed.

6. Clean Up

• Remove the drill bit from the drill and store it properly.
• Brush away or vacuum any dust and debris from the drilling area.
• Safely store all tools and safety equipment.

7. Additional Tips

• Ensure the drill bit is suitable for the specific type of masonry you are working with.
• Apply steady pressure, but do not force the drill bit through the material.
• Periodically withdraw the drill bit to clear debris from the hole and prevent overheating.