DRAPER EXPERT 08902 M35 COBALT HSSE DRILL BIT 2.5MM X 57MM, PACK OF 2

How to Use the Draper Expert 08902 HSSE M35 Cobalt Drill Bit 2.5mm x 57mm 2/PK

Introduction

The Draper Expert 08902 HSSE M35 Cobalt Drill Bit is designed for precision drilling in tough materials. Follow these steps to ensure proper use and achieve the best results.

Tools and Materials Needed

• Draper Expert 08902 HSSE M35 Cobalt Drill Bit 2.5mm x 57mm
• Drill or drill press
• Safety goggles
• Protective gloves
• Clamping device (optional)
• Lubricating oil (for metal drilling)

Safety Precautions

1. Always wear safety goggles to protect your eyes from debris.
2. Use protective gloves to avoid hand injuries.
3. Ensure the drill is turned off when installing or removing the drill bit.
4. Secure the material being drilled with a clamping device if necessary.

Installation of the Drill Bit

1. Ensure the drill is unplugged or powered off.
2. Open the chuck on your drill to accommodate the 2.5mm shank.
3. Insert the drill bit into the chuck with the fluted end pointing outward.
4. Tighten the chuck securely to hold the drill bit in place.

Preparing the Material

1. Mark the point on the material where you want to drill.
2. If drilling metal, apply a few drops of lubricating oil to the marked area.
3. Secure the material using a clamping device to prevent movement.

Drilling Procedure

1. Put on your safety goggles and gloves.
2. Position the drill bit at the marked point.
3. Start the drill at a low speed to create an initial pilot hole.
4. Gradually increase the drill speed to continue drilling through the material.
5. Keep the drill steady and apply consistent pressure.

Post-Drilling Care

1. Turn off the drill and remove the drill bit from the chuck.
2. Wipe the drill bit clean with a cloth to remove any debris or lubricants.
3. Store the drill bit in a dry place to prevent rust.

Conclusion

By following these instructions, you can effectively use the Draper Expert 08902 HSSE M35 Cobalt Drill Bit for your drilling projects. Always prioritize safety and handle your tools with care.