Draper Expert 08898 HSSE M35 Cobalt 2mm x 49mm Drill Bit, Pack of 2
Roll over image to zoom in
How to Use the DRAPER EXPERT 08898 HSSE M35 Cobalt Drill Bit 2mm x 49mm 2/PK
Introduction
This guide will help beginners understand how to effectively use the DRAPER EXPERT 08898 cobalt drill bit.
Before You Begin
- Ensure you have the appropriate safety gear, including safety goggles and gloves.
- Make sure your drill is compatible with a 2mm drill bit.
- Verify the material you are drilling is suitable for cobalt drill bits, like stainless steel or other hard metals.
Setting Up
- Unpack the drill bits from the packaging.
- Select the appropriate drill bit for your task.
- Securely insert the drill bit into the drill’s chuck.
- Tighten the chuck to ensure the drill bit is firmly held in place.
Drilling Process
- Mark the spot where you want to drill.
- Position the drill bit at the marked spot.
- Start drilling at a low speed to create a pilot hole.
- Gradually increase the speed as needed while maintaining control.
- Apply steady pressure but avoid pushing too hard to prevent damage.
After Use
- Turn off the drill and wait for the bit to cool down before touching it.
- Carefully remove the drill bit from the drill.
- Clean the drill bit with a dry cloth to remove any debris.
- Store the drill bits in a dry place to prevent rust.
Safety Tips
- Always wear appropriate safety gear.
- Do not force the drill bit into the material.
- Ensure the work area is clear of any obstructions.
Loading...
Product Location
-
£1.93
-
Reviews
There are no reviews yet.