CLEARWATER TA PLUS ALKALINITY BOOSTER 1KG

Description

How to Use Clearwater TA Plus Alkalinity Increaser 1KG

Introduction

This guide will help beginners understand how to properly use the Clearwater TA Plus Alkalinity Increaser to maintain the correct alkalinity levels in their pool or spa.

Materials Needed

• Clearwater TA Plus Alkalinity Increaser 1KG
• Protective gloves
• Pool or spa water test kit
• Measuring cup
• Clean water bucket
• Stirring stick

Steps to Use

1. Test the Water:
   • Use a pool or spa water test kit to check the current alkalinity level.
   • Record the test results to determine how much increaser is needed.
2. Determine Dosage:
   • Refer to the product label for recommended dosage based on your pool or spa size and current alkalinity level.
3. Prepare the Solution:
   • Put on protective gloves to handle chemicals safely.
   • Measure the required amount of Clearwater TA Plus using a measuring cup.
   • Add the measured chemical to a clean water bucket filled with water.
   • Stir the solution until the chemical is fully dissolved.
4. Add to Pool or Spa:
   • Distribute the solution evenly around the pool or spa.
   • Avoid adding all at one spot to ensure even distribution.
5. Allow to Circulate:
   • Run the pool or spa pump for at least an hour to circulate the solution.
6. Re-test Alkalinity:
   • After allowing the solution to circulate, test the alkalinity level again.
   • If necessary, repeat the above steps to reach the desired alkalinity level.

Important Safety Tips

• Always wear protective gear when handling pool chemicals.
• Store the product in a cool, dry place out of reach of children.

Conclusion

By following these steps, you can effectively use Clearwater TA Plus Alkalinity Increaser to maintain balanced water chemistry in your pool or spa.